Version 1.0.0.0 Installation notes

1. Minimium system requirements:
    Microsoft Windows NT 4.0 (Intel) operating system with SP3 or higher installed, Windows 2000, Windows Me, Windows 98, or Windows 95 
    Administrative privileges on the system if using Windows NT 4.0 or Windows 2000 
    Microsoft Internet Explorer (IE) 4.01 (SP2) or higher if running on NT 4.0, Windows 98, or Windows 95 
    Pentium-class PC (150 MHz or higher recommended) 
    16 megabytes (MB) of RAM (32 MB recommended) 
    Disk (free) space required:
        10 MB in the setup directory 

        5 MB in the target directory 

		
2. Floppy disk installation procedure:

    Microsoft Windows NT 4.0 (Intel) operating system with SP3 or higher installed, Windows 2000.
        a.Insert Disk 1 into floppy drive and Run the Setup.exe file following the prompts for subsequent Disks.

    Windows 98, or Windows 95
        There is a known problem with installation directly from the floppy drive for these operating systems. WIN98 and 95 cannot find the required path directory for Disk2 and above. It will be necessary to do a hard drive install for these systems following the steps below.
        a.Copy each of the disks provided to a common directory on the hard drive.
        b.Open or Run the Setup.exe found under the DISK1 directory.
        c.Delete the Disk set copied to the common directory in a. 

3. CDROM installation procedure: All operating systems.
        a.Run the Setup.exe file found on the CDROM.





